TEL 01527 584000

TEL 01527 584000

Bonded Seals French Metric

  ABCDEFMIN.BURST
ALLIANCEALTERNATIVE+0.13+0.10+0.10+0.25+0.10+0.20PRESSURE
REFERENCEREFERENCE-0.00-0.10-0.10-0.00-0.10-0.20(BAR)
A301PPFM37.505.003.60  -1950
A302PPFM49.006.004.60  3.402000
A303PPFM510.007.005.60  4.501780
A304PPFM611.008.006.60 1.004.701680
A306PPFM611.408.407.000.30 4.701540
A307PPFM813.0010.008.60  6.401330
A310PPFM1017.0012.1010.70  8.561730
A312 PPFM1118.1013.2011.80  9.801600
A313 PPFM1219.0014.1012.70  9.731530
A315 PPFM1320.1015.2013.800.401.5010.801440
A316 PPFM1421.0016.1014.70  11.381370
A317 PPFM1623.0018.1016.700.30 11.411240
A318 PPFM1723.7018.8017.400.40 13.081200
A320 PPFM1827.0020.4018.70  14.761450
A321 PPFM2029.0022.4020.700.30 16.761340
A323 PPFM2130.0023.4021.70  17.801290
A324 PPFM2231.0024.4022.70  18.741240
A325 PPFM2332.0025.4023.70  19.30960
A326 PPFM2433.0026.4024.70 2.0020.111160
A327 PPFM2635.3028.7027.00  22.30870
A328 PPFM2736.0029.4027.70  23.301060
A329 PPFM2836.0030.3028.60  24.80730
A331 PPFM3039.0032.4030.700.40 25.70970
A332 PPFM3342.0035.4033.70  28.70900
A333 PPFM3648.0039.6037.00  31.101010
A334 PPFM3951.0042.6040.00 2.5034.10950
A335 PPFM4254.0045.6043.00 +0.1536.50890
A336 PPFM4557.0048.6046.00 -0.1539.50860
A337 PPFM4860.0051.6049.00  41.90790

Standard Design

Self-centralising Design

KEY FEATURES OF SELF-CENTRALISING:

  • Elimination of seal offset
  • Elimination of leaks
  • Ease of installation
  • Reduced assembly time
  • Captive assembly

RUBBER SPECIFICATION

Alliance Bonded Sealing Washers can be supplied in a number of elastomeric compounds which include Nitrile, Viton, Hydrogenated Nitrile and EPDM. Nitrile and Viton are the most common, available from stock, and between them, are capable of meeting almost all sealing duties. Our Technical Helpline will expand on application details and fluids compatibility - please call us.

NITRILE NBRFLUOROCARBON
Temp. Range: -30oC to +110oCTemp. Range: -25oC to +250oC
Physical PropertiesPhysical Properties
Hardness IRHD80-90Hardeness IRHD75-85
Tensile strength Mpa10.34Tensile strength Mpa12 Min
Elongation at Break %110 MinElongation at Break %200
Specific Gravity1.35+/-0.03Specific Gravity1.83+/-0.03

In addition to Imperial, BSP, French & Metric sizes detailed, Alliance Seals Limited can supply Bonded Seals to:

  • Self-Centralising design
  • CETOP standard
  • Special "slim-line" low-cost series
  • "Lockseal" & "Threadseal" design

ALSO AVAILABLE FROM ALLIANCE SEALS LTD

  • Washers & Gaskets in Rubber, Nylon, Fibre, PTFE
  • O-Rings - in excess of 8000 standard sizesOil-Seals, Hydraulic Seals,
  • Wipers, Mouldings

Contact Us

If you require further technical information, please email sales@allianceseals.co.uk.
Alternatively contact us via our contact form on our contact page.